S. M. ADHESIVES
GST : 27AEKPA3220L1ZQ

call images

Call us

08045813551

Change Language
Polyurethane Construction Adhesive Sealant

Polyurethane Construction Adhesive Sealant

Product Details:

X

Product Description



This Polyurethane Construction Adhesive Sealant is an industrial-grade product with a purity ranging from 80-99%. It is a waterproof liquid adhesive sealant that comes in a white powder form. This versatile product can be used for various construction applications, providing a strong and durable bond.

APPLICATIONS Used for bonding various construction materials and as sealing joint. 

 

  • Metal to Metal
  • Metal to Concrete 
  • Concrete to Concrete 
  • Metal to plastic 
  • Wood to plastic 

PROPERTIES

 

  • Possesses permanent elasticity 
  • No sagging - Thixotropic 
  • No surface tackiness after full cure.
  • Do not pick up dirt 
  • No shrinkage 
  • Can be applied with hand gun and tooled easily 
  • Paintable 

INSTRUCTIONS

 

  • Before application, be sure that joint surfaces are clean, dry and free of all contamination 
  • Apply sealant evenly, If necessary, use masking tape and remove the tape while the sealant is still soft 
  • Joint width/depth ratio should be 2:1 (Table 1) 
  • If necessary, use back up material to adjust joint depth
  • Sealants should adhere to only two surfaces of the joint: Use backer rods and bond breakers to facilitate 

CONSUMPTION (approx.) Table 1

 

 

 

Joint Width

15 mm

20 mm

25 mm

30 mm

30 mm

Joint Depth

8 mm

10 mm

12 mm

15mm

15 mm

Joint length/600 ml 

5 meters

3 meters

2 meters

1,3 meters

1.1 meters


STORAGE AND SHELF LIFE: 12 months if stored in its original package, away from direct sunlight and moisture, between +10 deg C and  +25 deg C. 

RESTRICTIONS : 

  • Avoid application below 5 XC and above 40 deg C
  • Do not apply on frozen or wet surfaces or through standing water

PACKAGING : 600ml, Sausage

TECHNICAL PROPERTIES 

  • Basis : Polyurethane 
  • Consistency : Thixotropic 
  • Curing Mechanism : Moisture Curing 
  • Density : 1,20-/+ 0,03 g/ml  
  • Tack free time : 60 -/+ 10 min (23 deg C and 50% R.H) 
  • Curing Rate : Min. 2 mm/day (23 deg C and 50% R.H) 
  • Temperature Resistance : -40 C to +70 deg  C 
  • Application Temperature : +5 C to +40 deg C
  • Hardness Shore A : 40 -/+  5 
  • Paintibility : Yes 
  • Elastic Recovery : >70% 
  • Movement Capability : 35%
  • Elongation at break : %  400 2 
  • Tensile Strength : 2-2,5 N/mm

 

 

Tell us about your requirement
product

Price:

Quantity
Select Unit

  • 50
  • 100
  • 200
  • 250
  • 500
  • 1000+
Additional detail
Mobile number

Email



Back to top